Support · Windows and Mac

Installing and unlocking your instruments.

Run the installer, open your music software, and drop in your licence. About five minutes, with no account to make and nothing that needs the internet afterwards.

What you need

  • Windows 10 or 11, 64-bit; or a Mac with macOS 12 or later, Apple silicon or Intel.
  • Music software that loads VST3 plugins, such as Ableton Live, Bitwig Studio, Cubase, FL Studio or Reaper; on a Mac, Audio Unit hosts too, such as Logic Pro and GarageBand. Every instrument also runs on its own, as a standalone application.
  • Your licence, from your order email. You can install first and add the licence at any time.
One instrument<Instrument>-<version>-Windows.exe: the plugin and its standalone application. On a Mac, <Instrument>-<version>-Mac.pkg: the VST3 plugin, the Audio Unit and the standalone application.
GakudanGakudan-<version>-Windows.exe: Kiri, Nagare, Hibari and Kaminari, the four generators that play together, in a single installer. On a Mac, each of the four has its own installer.

Install on Windows

  1. Close your music software. Windows cannot replace a plugin that is in use, and a host that is open will not see a new one until it looks again.
  2. Run the installer. Windows asks whether to allow it to make changes. The publisher should read Denki Digital Limited. If it says Unknown publisher, don't run it, and write to [email protected].
  3. If Windows shows "Windows protected your PC", choose More info, check that the publisher reads Denki Digital Limited, then choose Run anyway. Windows says this about new releases while it is still learning to recognise them; it fades as more people install them.
  4. Choose what to install. The VST3 plugin always installs. The standalone application is ticked too; untick it if you only want the plugin.
  5. Finish. Tick Open now to try the standalone straight away.

Install on a Mac

  1. Close your music software. A host that is open will not see a new plugin until it looks again.
  2. Open the installer, the .pkg file. It is signed by Denki Digital Limited and notarised by Apple, so it opens without a warning. If your Mac says it can't check it for malicious software, don't open it: download it again from this site, or write to [email protected].
  3. Agree to the licence, and choose what to install. The VST3 plugin, the Audio Unit and the standalone application are all ticked; Customise leaves any out.
  4. Enter your password when your Mac asks. The plugins install for everyone on the computer, as all plugins do, so it needs your permission.

Each runs on macOS 12 or later, Apple silicon or Intel.

Open it in your host

Most hosts find a new plugin the next time they start. You'll find it under Denki Digital, its name followed by what it is, such as Kumo Reverb, Henge Synth or Kiri Chords. If yours doesn't show it, ask it to look again:

Ableton LiveSettings, then Plug-Ins: turn on Use VST3 Plug-in System Folders (on a Mac, or Use Audio Units), then Rescan.
ReaperOptions, Preferences, Plug-ins, VST: Re-scan.
FL StudioOptions, Manage plugins: start a scan.
Bitwig and CubaseThese look for new plugins as they start: close and reopen them, with the system VST3 folder switched on in their plugin settings.
Logic Pro and GarageBandThese check new Audio Units as they start, and list them under Audio Units, then Denki Digital.

Menu names move between versions; your host's own manual has the current ones.

Ableton Live on Windows: if an instrument's window looks soft, right-click the title of its device in Live's Device View, untick Auto-Scale Plug-In Window, then open the window again. Every Denki Digital instrument scales itself to your screen and stays sharp at any size; Live's auto-scaling stretches a smaller picture instead.

  • Effects (Kumo, Shimo, Kodama, Kohaku) go on an audio track, or a return.
  • Synthesizers (Henge, Kosen, Tasogare, Kiseki, Tsukumo 99, Hotaru 240, Hyō) go on an instrument or MIDI track.
  • Tsugime, musical destruction, goes on an audio track, a return, or after an instrument on its track, and its sampler plays from your keyboard too. Its manual shows how to play it from another track.
  • Generators (Kiri, Nagare, Hibari, Kaminari) make MIDI: each sits on its own track and plays a synthesizer on another. Hosts route MIDI between tracks differently, and each generator's manual shows how in yours. In Logic Pro a generator is a MIDI effect: put it in the MIDI FX slot of your synthesizer's track. Ableton Live can't load an Audio Unit MIDI effect, so on a Mac it finds only the generators' VST3: if they aren't in Live's list, turn on Use VST3 Plug-in System Folders and rescan, as above.

Or on its own

Each instrument is also an application of its own: in the Start menu under Denki Digital, or on a Mac in Applications, in the Denki Digital folder. Click Options at the top left, then Audio/MIDI Settings... to choose your audio interface and tick your keyboard under the MIDI inputs. The application remembers these, the sound you left it on and where its window was.

  • Effects play what comes into your audio interface. The input starts muted, so that a microphone can't howl through your speakers: put on headphones, then click Unmute Input. On a Mac, the first time, your Mac asks whether the application may use the microphone: allow it, or it hears nothing.
  • Generators make no sound of their own. In the same settings, choose a MIDI output, such as a hardware synthesizer, for them to play. They are at their best inside your music software.

Unlock it

Your licence comes with your order, in the email and on the order page: a few lines of text that begin Denki Digital licence and end with a signature. It carries your name, and nothing in it needs the internet: no account, no activation, now or later. The same licence works on Windows and on a Mac.

  1. Copy all of it, from Denki Digital licence to the end of the signature line. Then click the small key by any Denki Digital instrument's size control and choose Paste licence from the clipboard.
  2. Or keep it as a file: paste it into a plain text file (ending .txt or .denkilicence) and drop that onto the panel, or choose Load licence file... from the same key.
  3. That's all. The key's menu now says Licensed to your name, and every instrument the licence covers unlocks at once, in every open project.

The licence is kept in Documents/Denki Digital/Licences, in your Documents folder on Windows and on a Mac alike. Keep a copy with your music, as you would a manual.

Before you unlock, every instrument works fully, with no time limit, and rests for two seconds once a minute: the sound fades out and back, and the generators send no notes for those two seconds, and leave the last beat of every bar out of a clip you drag from them. A small Demo notice on each panel says so; its cross closes it.

Hotaru 240 and Tsukumo 99 are free: there is nothing to unlock, and they never rest.

Where everything lives

Plugins, WindowsC:\Program Files\Common Files\VST3, as <Instrument>.vst3
Plugins, Mac/Library/Audio/Plug-Ins/VST3, as <Instrument>.vst3, and the Audio Unit in /Library/Audio/Plug-Ins/Components, as <Instrument>.component
Standalone, WindowsC:\Program Files\Denki Digital\<Instrument> (for Gakudan, ...\Gakudan), and in the Start menu under Denki Digital
Standalone, Mac/Applications/Denki Digital/<Instrument>
LicencesDocuments/Denki Digital/Licences
Your presetsDocuments/Denki Digital/<Instrument>/Presets, with designer banks beside them in Banks. Each instrument's program menu opens the folder.
ManualsEach instrument's manual, as a PDF, beside its standalone (on Windows, also in the Start menu under Denki Digital Manuals), and on its page on this site
NoticesThe licences of the fonts and code inside: in Licences beside the standalone, and from the key's menu, Third-party notices...

Update, move, uninstall

Updating. Run the new installer; it installs over the old version. Your presets, your licence and your projects are left as they are.

A new computer. Install there, then copy Documents/Denki Digital across: your licences and presets come with it, between Windows and a Mac too.

Uninstalling. On Windows, open Settings, then Apps, then Installed apps, find the instrument (or Gakudan) and choose Uninstall. On a Mac, drag the instrument's .vst3 and .component, and its folder in /Applications/Denki Digital, to the Bin. Either way, your presets and licences in Documents stay where they are, in case you return; delete the folder yourself if you want them gone.

If something goes wrong

The instrument doesn't appear in my host

Ask the host to rescan (above), and check that it loads VST3 plugins, or on a Mac Audio Units. On Windows the plugin should be in C:\Program Files\Common Files\VST3; on a Mac, in /Library/Audio/Plug-Ins/VST3 and /Library/Audio/Plug-Ins/Components. If it isn't, run the installer again.

The licence isn't accepted

The message says why. Not a Denki Digital licence: that is a different file. Changed after it was issued: copy the whole text again, signature included, without editing it. Signed with a key this version does not know: install the latest version of the instrument.

It still rests every minute

Click the key: its menu shows the licence that is loaded and who it belongs to. A licence covers the instruments you bought; another instrument rests until it has its own.

Windows warns about the installer

Check the publisher reads Denki Digital Limited, then choose More info and Run anyway (step 3 of installing on Windows). If the publisher is missing or different, don't run it: download it again from this site.

My Mac won't open the installer

Every Denki Digital installer for the Mac is notarised by Apple, so it should open without a warning. If your Mac says it can't check it, don't open it: download it again from this site. If it says your macOS is too old, the instruments need macOS 12 or later.

Something else

Write to [email protected] with the instrument, its version, your computer and host, and what happened. A person reads every message and replies within two working days. Reporting a problem lists what helps.